Hitachi SJ Series, User Manual

Page: 417 / 786

12-20-2
Chapter 12 Inverter Function
1220.2 Outputting a signal during forward-
or reverse-direction operation
• I want to detect the information of inverter
operating the forward direction and convey to the
system.
• I want to detect the information of inverter
operating the reverse-direction and convey to the
system.
• Assign the output terminal function 008 [FWR]
forward-direction operating signal to one of
[CC-01] to [CC-07] that corresponds to the output
terminal and output the signal.
• You can output the signal only when the inverter is
operating in the forward direction by assigning 008
[FWR] to the output terminal function selection.
• The timing chart is as follows.
Parameter
• [FWR] and [RVR] will not be output during DC
breaking or when the servo is on.
• Assign the output terminal function 009 [RVR]
reverse-direction operating signal to one of
[CC-01] to [CC-07] that corresponds to the output
terminal and output the signal.
• You can output the signal only when the inverter is
operating in the reverse direction by assigning 009
[RVR] to the output terminal function selection.
• The timing chart is as follows.
Item Parameter Data Description
Output terminal function
selection 11-15
[CC-01]~[CC-05]
008
[FWR]: The forward-direction operation
signal is output to the output terminal
assigned.
Relay output terminal
function selection
16A-16C
[CC-06]
009
[RVR]: The reverse-direction operation
signal is output to the output terminal
assigned.
Relay output terminal
function selection
AL1-AL0/AL2-AL0
[CC-07]
Ｑ
Ａ
！
Output
Frequency
(Hz)
[FWR]
In
forward-direction
operation
In
reverse-direction
operation
Output
Frequency
(Hz)
[RVR]
In forward-direction
operation
In reverse-direction
operation