Hitachi SJ Series, User Manual

Page: 431 / 786

12-23-2
Chapter 12 About the inverter function
Example 3) Use a signal for which an XOR operation
has been performed with an overload advance notice
signal (035: OL) and an overload advance notice
signal 2 (036: OL2), and, when a current falls within a
certain range, output the signal as Logical output 5
(LOG5) to Output terminal function 3.
• Output terminal function 3 [CC-03]: 066 (LOG5)
• Logical output signal 5 selection 1 [CC-46]: 035
(OL)
• Logical output signal 5 selection 2 [CC-47]: 036
(OL2)
• Logical output signal 5 operator [CC-48]: 02
(XOR)
Parameters
Item Parameter Data Description
Output terminal
function selection
Relay output
terminal function
selection
[CC-01]~[CC-05]
062
063
064
065
066
067
068
LOG1: Result of logical
operation 1
LOG2: Result of logical
operation 2
LOG3: Result of logical
operation 3
LOG4: Result of logical
operation 4
LOG5: Result of logical
operation 5
LOG6: Result of logical
operation 6
LOG7: Result of logical
operation 7
16C relay output
terminal function
selection
[CC-06]
AL relay output
terminal function
selection
[CC-07]
Logical output
signal selection 1
[CC-40], [CC-43], [CC-46],
[CC-49], [CC-52], [CC-55],
[CC-58] Select from the output terminal
function selection data
(excluding LOG1 to LOG7)
Select Arithmetic operation
target 1
Logical output
signal selection 2
[CC-41], [CC-44], [CC-47],
[CC-50], [CC-53], [CC-56],
[CC-59] Select from the output terminal
function selection data
(excluding LOG1 to LOG7)
Select Arithmetic operation
target 2
Logical output
signal operator
selection
[CC-42], [CC-45], [CC-48],
[CC-51], [CC-54], [CC-57],
[CC-60] 00 AND
01 OR
02 XOR
OL
OL2
LOG5(XOR)
ON
ON
ON
ON
ON
ON