Hitachi SJ Series, User Manual

Page: 106 / 786

9.3.2
・
・
Monitor screen
Chapter 9
9.3.2 Changing a Parameter While
Watching a Monitor "Concurrent
Monitor"
・
To control the inverter operation, I want to change
a parameter while monitoring the operation.
・
On the screen that is displayed upon power
using the right and left (
setting screen "Concurrent monitor" (H03).
Monitor screen
Set-up procedure
Q
▼
Menu
STOP
Output Frequency
FA
Chapter 9
Changing a Parameter While
Watching a Monitor "Concurrent
Monitor"
To control the inverter operation, I want to change
a parameter while monitoring the operation.
On the screen that is displayed upon power
using the right and left (
setting screen "Concurrent monitor" (H03).
Monitor screen - Parameter selection screen
up procedure
Output Frequency
FA-01
Output Frequency
FA-01
Output Frequency
AA101
First main speed command selection
07: Parameter set
Menu oFW
STOP
Output Frequency
FA-01
Changing a Parameter While
Watching a Monitor "Concurrent
To control the inverter operation, I want to change
a parameter while monitoring the operation.
On the screen that is displayed upon power
using the right and left (
) keys, navigate to a
setting screen "Concurrent monitor" (H03).
Parameter selection screen
Output Frequency
01
Output Frequency
Output Frequency
First main speed command selection
07: Parameter set-up
0.00Hz
M1
Output Frequency
[0.00
Changing a Parameter While
Watching a Monitor "Concurrent
To control the inverter operation, I want to change
a parameter while monitoring the operation.
On the screen that is displayed upon power-on,
keys, navigate to a
setting screen "Concurrent monitor" (H03).
Parameter selection screen
0.00 Hz
0.00 Hz
[0.00-60.00]
0.00 Hz
0.00 Hz
[0.00-60.00]
0.00 Hz
First main speed command selection
Optional
device
H03
0.00 Hz
0.00 Hz
[0.00-60.00]
9-11
To control the inverter operation, I want to change
on,
keys, navigate to a
・
When configuring settings such as frequency
command and acceleration/deceleration time while
watching the monitor during operation, you can
change the settings on this monitor screen.
・
On the setting screen "Concurrent monitor", you
can change
For details of the monitor, see "9.4.2 Monitoring of
Setting Screen "Concurrent Monitor".
・
In the case of a parameter that requires selection
of an item, the screen changes to the item
selection screen.
Action
3.1
(Tips)
Using the
to change the parameter or change the monitor.
3.2
3.3
Example1)
Example2)
A
!
When configuring settings such as frequency
command and acceleration/deceleration time while
watching the monitor during operation, you can
change the settings on this monitor screen.
On the setting screen "Concurrent monitor", you
can change parameters while watching the monitor.
For details of the monitor, see "9.4.2 Monitoring of
Setting Screen "Concurrent Monitor".
In the case of a parameter that requires selection
of an item, the screen changes to the item
selection screen.
Action
Press the SEL(O) key to change the color of
parameter field. To 3.2.
(Tips)
Using the up and down
change the parameter or change the monitor.
When the SEL(O) key is pressed again, the left
most letter of the parameter can be changed. To
3.3.
Using the arrow
parameter number that you want to change,
then press the SEL(O) key.
Example1) When the frequency command destination
[AA101] First speed command selection is
changed. To 3.4.
Example2) When the frequency command value is
controlled in [FA
command destination is set to 07:
Parameter setting. To 3.7.
A
Operating Instructions
When configuring settings such as frequency
command and acceleration/deceleration time while
watching the monitor during operation, you can
change the settings on this monitor screen.
On the setting screen "Concurrent monitor", you
parameters while watching the monitor.
For details of the monitor, see "9.4.2 Monitoring of
Setting Screen "Concurrent Monitor".
In the case of a parameter that requires selection
of an item, the screen changes to the item
selection screen.
Press the SEL(O) key to change the color of
parameter field. To 3.2.
up and down (
change the parameter or change the monitor.
When the SEL(O) key is pressed again, the left
most letter of the parameter can be changed. To
Using the arrow (
parameter number that you want to change,
then press the SEL(O) key.
When the frequency command destination
[AA101] First speed command selection is
changed. To 3.4.
When the frequency command value is
controlled in [FA-01] while the frequency
command destination is set to 07:
Parameter setting. To 3.7.
Operating Instructions
When configuring settings such as frequency
command and acceleration/deceleration time while
watching the monitor during operation, you can
change the settings on this monitor screen.
On the setting screen "Concurrent monitor", you
parameters while watching the monitor.
For details of the monitor, see "9.4.2 Monitoring of
Setting Screen "Concurrent Monitor".
In the case of a parameter that requires selection
of an item, the screen changes to the item
Press the SEL(O) key to change the color of
) keys, you can choose
change the parameter or change the monitor.
When the SEL(O) key is pressed again, the left
most letter of the parameter can be changed. To
) keys to change the
parameter number that you want to change,
then press the SEL(O) key.
When the frequency command destination
[AA101] First speed command selection is
When the frequency command value is
01] while the frequency
command destination is set to 07:
Parameter setting. To 3.7.
Operating Instructions
When configuring settings such as frequency
command and acceleration/deceleration time while
watching the monitor during operation, you can
change the settings on this monitor screen.
On the setting screen "Concurrent monitor", you
parameters while watching the monitor.
For details of the monitor, see "9.4.2 Monitoring of
In the case of a parameter that requires selection
of an item, the screen changes to the item
Press the SEL(O) key to change the color of
, you can choose
change the parameter or change the monitor.
When the SEL(O) key is pressed again, the left-
most letter of the parameter can be changed. To
) keys to change the
parameter number that you want to change, and
When the frequency command destination
[AA101] First speed command selection is
When the frequency command value is
01] while the frequency
command destination is set to 07:
Operating Instructions
command and acceleration/deceleration time while
parameters while watching the monitor.
For details of the monitor, see "9.4.2 Monitoring of
In the case of a parameter that requires selection
most letter of the parameter can be changed. To
and
When the frequency command destination
[AA101] First speed command selection is