Hitachi SJ Series, User Manual

Page: 698 / 786

21-27
Chapter 21 Technical Notes
SJ700D / SJ700B SJ-P1
Remarks
Display code Function name New code
C052 Feedback comparison signal OFF level AH-73
C053 Feedback comparison signal ON level AH-74
C055 Overtorque level (normal rotation powered) CE120 Addition of individual settings for second control
C056
Overtorque level (reverse rotation
regenerative)
CE121 Addition of individual settings for second control
C057 Overtorque level (reverse rotation powered) CE122 Addition of individual settings for second control
C058
Overtorque level (normal rotation
regenerative)
CE123 Addition of individual settings for second control
C061 Thermal warning level CE-30
C062 Alarm code selection
This function is enabled when an alarm code
(084-087) is set to an input terminal.
C063 0Hz detection level CE-33
C064 Cooling fin overheat advance notice level CE-34
C071
Communication transmission speed
selection
CF-01
C072 Communication station number selection CF-02
C073 Communication bit length selection Abolished due to Modbus communication
C074 Communication parity selection CF-03
C075 Communication stop bit selection CF-04
C076 Communication error selection CF-05
C077 Communication trip time CF-06
C078 Stop waiting time CF-07
C079 Communication method selection Abolished due to Modbus communication
C081 O adjustment Adjusted with Cb-30 or Cb-31
C082 OI adjustment Adjusted with Cb-32 or Cb-33
C083 O2 adjustment Adjusted with Cb-34 or Cb-35
C085 Thermistor adjustment Cb-41
C091 Debug mode selection UC-01
C101 UP/DWN memory selection CA-61
C102 Reset selection CA-72
C103 Reset f matching selection bb-41
C105 FM gain setting Cd-14
C106 AM gain setting Cd-24
C107 AMI gain setting Cd-34
C109 AM bias setting Cd-23
C110 AMI bias setting Cd-33
C111 Overload advance notice level 2 CE107
C121 O zero adjustment Cb-30/Cb-31 Adjusted with Cb-30 or Cb-31
C122 OI zero adjustment Cb-32/Cb-33 Adjusted with Cb-32 or Cb-33
C123 O2 zero adjustment Cb-34/Cb-35 Adjusted with Cb-34 or Cb-35