background image

Product Highlights : 

 

Full wire speed performance

 

Comprehensive configuration 

  options

 

Loop back test support

 

Remote TP link monitoring

 

Low power consumption

 

Loop back test support

 

Optional Din-Rail mounting

 

Center Chassis installation 

  support

 

Options for Bi-Di 

  communication

 

Options for CWDM

KC-3DR : 
Din-Rail mounting bracket

KC-1300 : 
Managed center chassis

Specifications : 

10/100Base-TX to 100Base-FX

Media Converters

The media converters are designed to convert 10Base-T or 100Base-T signals to/from 100Base-FX 
fiber signals. It is used to extend the connection distance between two Ethernet devices via fiber 
cable transparently with no performance degradation. The media converters not only support 
existing variety of multimode and single mode fibers but also support Bi-Di WDM and CWDM fiber 
network applications. It is also featured with design to support center chassis installation with 
optional power redundancy and management features when a larger fiber network is required.

Key Features :

 

Convert speed and media type  in full wire speed

 

Support 10/100M dual speed on TP connections, auto-negotiation, and auto-MDI/MDI-X  

  detection

 

Link fault pass through function

 

Transparent to 802.1Q VLAN tagged packets

 

Far End Fault function on FX port

 

Support desktop,wall, and DIN-rail mounting

 

Support center chassis installation

 

Low power consumption

 

Support wide range of fiber options

 

Provide user accessible settings for TP port configuration,disabling link fault pass through  

  function

KC-300DM Specific

 

Provides indications of remote media converter's TP port status

 

Provides Loop Back Test function with connected remote media converter

TP Port 

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX

     

Shielded RJ-45 jacks with Auto MDI/MDI-X detection 

     

Auto-negotiation for speed and duplex auto detection

     

Forced mode with speed and duplex settings

     

Speed for 10Mbps or 100Mbps, Full-duplex or half-duplex support

FX Port 

IEEE 802.3u 100Base-FX compliant

     

Forced 100Mbps, Full duplex (factory default)

     

Far end fault Function

Cable 

Cat. 5 UTP cable, MMF - 62.5/125µm, 50/125µm, SMF - 9 /125µm

LEDs 

KC-300D : 

 

Power status

     

TP Ports :  

 

Link/Act, Speed, Duplex status

     

FX Ports :  

 

Link/Act status, Fiber signal detected

     

KC-300DM:   

Power status

     

TP Ports :  

 

Link/Act, Speed, Duplex status

     

FX Ports :  

 

Link/Act status, Fiber signal detected

     

Remote TP Ports :   Link, Speed, Duplex status

KC-300D, KC-300DM

080110

Reviews: