Hitachi SJ Series, User Manual

Page: 105 / 786

・
(ii)
Chapter 9
・
In the scroll mode screen (L02), (i
the parameter at the top of each group by using
the right and left (
parameter at the top of the sub
etc.) of the group by using
(ii) Jump function using
the F2(Next group) key
▼
S
Chapter 9
In the scroll mode screen (L02), (i
the parameter at the top of each group by using
right and left ( ) keys
parameter at the top of the sub
etc.) of the group by using
Jump function using
the F2(Next group) key
S-Menu oFW
STOP
A: Operation function
AA104 First auxiliary speed setting
In the scroll mode screen (L02), (i) you can jump to
the parameter at the top of each group by using
) keys or (ii) jump to the
parameter at the top of the sub-group (AA,
etc.) of the group by using F2(Next group) key.
0.00Hz oFW
A: Operation function
07: Parameter setting
00: Disabled
AA104 First auxiliary speed setting
S-Menu
STOP
A: Operation function
Ab -03 Multistep speed selection
) you can jump to
the parameter at the top of each group by using
or (ii) jump to the
group (AA, Ab,
F2(Next group) key.
S-Menu oFW
STOP
A: Operation function
AC -03 Acceleration pattern selection
2
Next group
M1
L02
07: Parameter setting
00: Disabled
60.00Hz
AA104 First auxiliary speed setting
0.00Hz oFW
A: Operation function
00: Binary (16th speed)
03 Multistep speed selection
9-10
) you can jump to
the parameter at the top of each group by using
Ab,
(i) You can jump to the top parameter of each group by
using the
(
monitor/setting<
parameters<
(ii) You can jump to the top parameter of the sub
the group (AA, Ab, etc.) using the F2(
(t
・
Example of group A:
(i) Jump function using the
(
0.00Hz oFW
A: Operation function
00: Parameter setting
00: Linear acceleration
03 Acceleration pattern selection
F2 key
Next group
L02
S
Next group 0.00Hz
M1
1.00
00: Binary (16th speed)
03 Multistep speed selection
0.00Hz
You can jump to the top parameter of each group by
using the right and left (
(
⋯
<->All parameters<
monitor/setting<
parameters<->
You can jump to the top parameter of the sub
the group (AA, Ab, etc.) using the F2(
(transition is performed in one direction (see below)).
Example of group A:
Jump function using the
(
) keys
Next group 0.00Hz
M1
L02
00: Parameter setting
00: Common
00: Linear acceleration
03 Acceleration pattern selection
key
F2 key
2
S-Menu oFW
STOP
b: Protective function
bA102 First frequency upper limiter ..
bA103 First frequency lower limiter ..
bA110 First torque limit
Next group
L02
1.00
00: Binary (16th speed)
0.00Hz
Operating Instructions
You can jump to the top parameter of each group by
right and left (
>All parameters<->d: Monitor<
monitor/setting<->
⋯
<->U: Initial setting, PDN<
>
⋯
)
You can jump to the top parameter of the sub
the group (AA, Ab, etc.) using the F2(
ransition is performed in one direction (see below)).
Example of group A:
⋯
->AA
Jump function using the right and left
Next group
L02
F2 key
F2 key
2
0.00Hz oFW
b: Protective function
bA102 First frequency upper limiter ..
bA103 First frequency lower limiter ..
07: Parameter setting
bA110 First torque limit selection
Operating Instructions
You can jump to the top parameter of each group by
) keys.
>d: Monitor<->F: Command
>U: Initial setting, PDN<
You can jump to the top parameter of the sub
the group (AA, Ab, etc.) using the F2(Next group
ransition is performed in one direction (see below)).
>AA->Ab->AC->
⋯
right and left
F2 key
Next group
M1
L02
0.00Hz
bA102 First frequency upper limiter ..
0.00Hz
bA103 First frequency lower limiter ..
07: Parameter setting
selection
Operating Instructions
You can jump to the top parameter of each group by
>F: Command
>U: Initial setting, PDN<-> All
You can jump to the top parameter of the sub-group in
Next group) key
ransition is performed in one direction (see below)).
⋯
->AJ->AA->
⋯
Next group
L02
Operating Instructions
group in
⋯