12-21-1
Chapter 12
Inverter Function
12.21 How to compare the output
frequency and output to the terminal
12.21.1
Outputting a signal when the
frequency reaches the target
• I want to detect that the output frequency to the
motor has increased to the command and make a
notification to the system.
• Assign the output terminal function 002
[FA1]constant-speed reaching output signal to one
of [CC-01] to [CC-07] that corresponds to the
output terminal and output the signal.
• The signal will be output when the frequency has
reached the enabled frequency command.
• The signal [FA1] may not be output stably when the
frequency command fluctuates because an analog
input command is used. In this case, the symptom
may be alleviated by using the ON/OFF delay
function of the output terminal.
Parameter
Item
Parameter
Data
Description
Output terminal
function selection
[CC-01]~[CC-05]
002
[FA1]:The constant-speed reaching output will be
output as a signal to the output terminal assigned.
Relay output
terminal function
selection
[CC-06]
Relay output
terminal function
selection
[CC-07]
Q
A
!
Output Frequency
Set frequency
fon: 1% of the maximum frequency
foff: 2% of the maximum frequency
(Operation example)
Maximum frequency: 60 Hz
Set frequency
: 50 Hz
• fon=60×0.01=0.6Hz
• foff=60×0.02=1.2Hz
• In acceleration: On at 50 - 0.6 =
49.4 Hz
• In deceleration: On at 50 - 1.2 =
48.8 Hz
Summary of Contents for SJ Series
