Hitachi SJ Series, User Manual

Page: 155 / 786

1
Chapter 12
• The inverter rating is changed.
▼
Output Frequency
FA-01
Main speed command (Operator
keypad)
2
1
Press right (
2
Press SEL(o) key twice
parameter setting display screen
parameter area begins blinking.
Menu
oFW
STOP
Output Frequency
Output current
Input terminal monitor
Menu
oFW
STOP
Output Frequency
FA-01
Main speed command (Operator
keypad)
Output Frequency
FA-01
Main speed command (Operator
keypad)
1
Chapter 12
The inverter rating is changed.
Output Frequency
0.00 Hz
Main speed command (Operator
0.00 Hz
[0.00
) key on the display screen.
Press SEL(o) key twice on the
parameter setting display screen
parameter area begins blinking.
0.00 oFW
M1
Output Frequency
0.00 Hz
Output current
Input terminal monitor
LLLLLLLLLLL
0.00
oFW
M1
Output Frequency
0.00 Hz
Main speed command (Operator
0.00 Hz
[0.00
Output Frequency
0.00 Hz
01
Main speed command (Operator
0.00 Hz
[0.00
The inverter rating is changed.
0.00 Hz
Main speed command (Operator
0.00 Hz
[0.00-60.00]
) key on the display screen.
on the
parameter setting display screen and the
parameter area begins blinking.
Optional
device
M1 H01
0.00 Hz
0.0 A
Input terminal monitor
LLLLLLLLLLL
Optional
device
M1 H03
0.00 Hz
Main speed command (Operator
0.00 Hz
[0.00-60.00]
0.00 Hz
Main speed command (Operator
0.00 Hz
[0.00-60.00]
Ub-03
Duty type selection
00: Very low duty
01: Low duty
02: Normal duty
*The change is applied and SEL(o)
key is used to proceed.
3
Use up, down, right, and left
keys to choose a parameter
and SEL(o) key to set it.
4
Use up and down keys to choose a
mode and SEL(o) key to set it.
Return
oFW
STOP
Output Frequency
Ub-03
Duty type selection
02: Normal duty
Back oFW
STOP
Ub-03
Duty type selection
00: Very low duty
01: Low duty
02: Normal duty
12-2-2
Duty type selection
00: Very low duty
01: Low duty
02: Normal duty
*The change is applied and SEL(o)
key is used to proceed.
Use up, down, right, and left
keys to choose a parameter
and SEL(o) key to set it.
and down keys to choose a
and SEL(o) key to set it.
0.00 oFW
Output Frequency
Duty type selection
02: Normal duty
0.00
oFW
Duty type selection
00: Very low duty
01: Low duty
02: Normal duty
Duty type selection
*The change is applied and SEL(o)
key is used to proceed.
Use up, down, right, and left
keys to choose a parameter
and SEL(o) key to set it.
and down keys to choose a
and SEL(o) key to set it.
----
M1 H03
0.00 Hz
Duty type selection
[00-02]
----
M1 H03
Duty type selection
00: Very low duty
02: Normal duty
*The change is applied and SEL(o)
5
Check the content on the previous
screen.
If the content is changed, the change is
supposed to be stored
element and
----
H03
Menu
oFW
STOP
Output
Ub-03
Duty type selection
00: Very low duty
Inverter Functions
Check the content on the previous
If the content is changed, the change is
supposed to be stored
element and the mode is switched.
0.00 oFW
Output Frequency
Duty type selection
00: Very low duty
Inverter Functions
Check the content on the previous
If the content is changed, the change is
supposed to be stored in the storage
the mode is switched.
----
M1
H03
0.00 Hz
Duty type selection
[00-02]
Inverter Functions
Check the content on the previous
If the content is changed, the change is
in the storage
the mode is switched.
----
H03