Version: 1.2
User Manual
REMOTE PANEL MANUAL FOR
PIP-HS/MS/MSX INVERTER-CHARGER SERIES
Page 1: ...Version 1 2 User Manual REMOTE PANEL MANUAL FOR PIP HS MS MSX INVERTER CHARGER SERIES ...
Page 2: ...be implemented with the proper screws Refer chart for recommended spec of screws Step 2 Please check communication port in inverter first If it is equipped with USB communication port please replace USB communication board with bundled RJ 45 communication board by following below steps If it s already with RJ45 communication port please skip this step M3 Ø 5 Ø 9 60 00 mm Communication port and pow...
Page 3: ...1 and JP2 in communication board as below 1KVA 3KVA inverter 1 3 JP1 1 3 JP1 1 3 JP2 1 3 JP2 Default communication board setting in inverter Modify setting in communication board when using remote panel 4KVA 5KVA inverter Default communication board setting in inverter Modify setting in communication board when using remote panel Step 4 If the inverter is not bundled with dry contact please follow...
Page 4: ...e inverter with dry contact connect NC and NO port of dry contact as below diagrams Diagram 1 Wiring diagram for inverter without dry contact Diagram 2 Wiring diagram for inverter with dry contact Operation After main switch and external power input switch only available for inverter without dry contact are powered on users can monitor and control the inverter from a distance with the remote panel...
