Suzuki GA413, Руководство по обслуживанию

Страница: 764 / 1246

MAINTENANCE SERVICE
ENGINE
ITEM 1-6
Exhaust System Inspection
When carrying out periodic maintenance, or the vehicle is raised
for other service, check exhaust system as follows:
Check rubber mountings for damage, deterioration, and out of
position.
Check exhaust system for leakage, loose connections, dents
and damages.
If bolts or nuts are loose, tighten them to specification.
Check nearby body areas for damaged, missing, or misposi-
tioned parts, open seams, holes, loose connections or other
defects which could permit exhaust fumes to seep into the ve-
hicle.
Make sure that exhaust system components have enough
clearance from the underbody to avoid overheating and pos-
sible damage to the floor carpet.
Any defects should be fixed at once.
WARNING:
To avoid danger of being burned, do not touch exhaust
system when it is still hot. Any service on exhaust sys-
tem should be performed when it is cool.
EMISSION CONTROL SYSTEM
ITEM 4-3
Fuel Evaporative Emission Control System Inspection
1) Visually inspect hoses for cracks, damage, or excessive bends.
Inspect all clamps for damage and proper position.
2) Check EVAP canister for operation and clog referring to “EVAP
EMISSION CONTROL SYSTEM” in SECTION 6E.
If a malfunction is found, repair or replace.
MAINTENANCE AND LUBRICATION 0B-5
GA413
supple