Suzuki GA413, Руководство по обслуживанию

Страница: 567 / 1246

4) Install interlock ball and locating ball in upper case.
After installing interlock roller in high speed gear shift shaft and
insert shaft into upper case as described in 2) and 3).
Fork (2) should installed in such direction as shown. Then drive
shift spring pin (1) until it becomes flush with outer surface of
fork.
5) Install interlock ball and locating ball into upper case. Then in-
sert reverse gear shift shaft into upper case as described in 2)
and 3).
TRANSMISSION LOWER CASE AND UPPER CASE
1) With countershaft assembly, reverse idle gear and reverse gear
shaft installed in lower case, check to ensure that bearing stop-
per rings (1) are fitted in both sides of lower case as shown.
Also check for 2 knock pins (2).
2) Make sure that mating surfaces of both lower and upper cases
are clean.
3) Install main shaft and input shaft assembly (1) in lower case (2).
4) Uniformly apply sealant to mating surface of lower case.
“A”: Sealant 99000-31110
7A-28 MANUAL TRANSMISSION