Suzuki GA413, Руководство по обслуживанию

Страница: 322 / 1246

7) For installation of timing belt, align 4 timing marks as shown in
figure by turning crankshaft.
1. “V” mark on cylinder head
cover
2. Timing mark by “E” on
camshaft timing belt pulley
3. Arrow mark on oil pump
case
4. Punch mark on crankshaft
timing belt pulley
8) Remove timing belt tensioner, tensioner plate, tensioner spring
and timing belt.
1. Timing belt
2. Tensioner plate
3. Tensioner bolt
4. Tensioner stud
5. Spring
1. Camshaft allowable turning range - - - By timing mark,
within 90
_
from “V” mark on head cover on both right and
left.
2. Crankshaft allowable turning range - - - By punch mark,
within 90
_
from arrow mark on oil pump case on both right
and left.
CAUTION:
D
After timing belt is removed, never turn camshaft
and crankshaft independently more than such an
extent as shown in figure. If turned, interference
may occur among piston and valves, and parts re-
lated to piston and valves may be damaged.
D
Never bend timing belt.
INSPECTION
D
Inspect timing belt for wear or crack.
Replace it as necessary.
6A-16 ENGINE MECHANICAL