Avaya Octel 50, Руководство по установке

Страница: 99 / 304

Setting Up the System Configuring System Setup Parameters
Octel 50 Installation Guide 8-39
Min
0
Max
9
Default
5
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Fax Parameters - #63
Fax Delivery
Retry Delay
(Minutes)
This parameter determines the number of minutes the Octel
50 system waits before attempting to send a fax after it
encounters a busy or no answer at the destination fax
machine.
When/How to Use For most Octel 50 systems, the default should be sufficient.
Increase this value if the Octel 50 system experiences
heavy fax traffic and the outbound ports are constantly
occupied by fax delivery.
Related Parameters/Features If the Number of Attempts when Sending a Fax is set to 0,
this parameter is not used.
If Set Too High The higher you set this parameter, the longer callers have to
wait for fax delivery.
If Set Too Low Ports may not have enough time to reset between delivery
attempts. Also, the number of attempts could be exhausted
before the fax can be delivered.
Min
1
Max
60
Default
2
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Fax Parameters - #64
Fax Prefix Code
This parameter specifies the prefix the Octel 50 system dials
when accessing an external line to send a fax.
When/How to Use
The minimum and maximum for this parameter refer to the
length of the entry allowed, not an actual value.
Related Parameters/Features If the length of the destination fax number is equal to or
greater than Number of Digits in Local Telephone Number,
the Octel 50 system uses the fax prefix code to access an
external fax line when dialing the destination fax number.
If Set Too High
Not applicable.
If Set Too Low Not applicable.
Min
0
Max
32
Default
9,
Requires
Restart
No
Switch-
Dependent
Yes
Set by
Integrator
No