Avaya Octel 50, Руководство по установке

Страница: 78 / 304

Setting Up the System Configuring System Setup Parameters
Octel 50 Installation Guide 8-18
If the switch does not provide positive disconnect, set this
parameter higher than 0. This prevents the Octel 50 system
from recording blank messages when callers have hung up
during recording.
Related Parameters/Features None.
If Set Too High When set too high, the Octel 50 system may delete actual
messages.
If Set Too Low If you leave this parameter set to 0, and your switch does
not provide positive disconnect, mailboxes may receive
blank messages.
Min
0
Max
10
Default
0
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Subscriber Parameters
The Subscriber parameters control password security features and message
maintenance features for subscriber mailboxes.
Subscriber Parameters - #28
Enable Extended
Password
Security
This parameter determines whether the Octel 50 system
requires subscribers to press <#> after they enter their
passwords to gain immediate access to their mailboxes.
If you enable this parameter and a subscriber enters the
correct password, but does not press <#>, the Octel 50
system pauses after the last digit before permitting access
to the mailbox.
If you disable this parameter, the Octel 50 system allows the
subscriber access as soon as they finish entering the last
digit of the correct password.
When/How to Use For most Octel 50 systems, leave this parameter enabled to
provide added security for mailboxes.
Related Parameters/Features Enable Extended Password Security is only used if
mailboxes have passwords.
If Set Too High
Not applicable.
If Set Too Low Not applicable.
Min
–
Max
–
Default
No
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No