Setting Up the System
Configuring System Setup Parameters
Octel 50 Installation Guide
8-28
Related Parameters/Features
You must also activate the networking options on the Class
of Service dialog box.
If Permit Outbound AMIS Dispatch is enabled but Permit
Inbound AMIS Dispatch is disabled, you can send network
messages but you cannot receive replies to those
messages.
If Set Too High
Not applicable.
If Set Too Low
Not applicable.
Min
–
Max
–
Default
No
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
AMIS Parameters - #45
Start of Economy
Weekday Hours
This parameter defines the system-wide start of economy
dispatch hours during the week. During economy hours,
the Octel 50 system sends any casual or administered
network messages marked for economy dispatch since
the end of economy hours the previous day.
When/How to Use
Enter the hour and minute that economy time begins in
military time. The same economy time is used for each
weekday; you cannot specify different economy times for
different weekdays.
When defining economy hours, use the off-peak rate
period defined by the phone carrier.
It is recommended that you start the economy hours a few
minutes after the start of the lower rate period to allow for
discrepancies between the Octel 50 system clock and the
carrier’s clocks.
Related Parameters/Features
You can use the Economy Dispatch fields on the AMIS
Node Entry dialog box to override the economy hours for
individual nodes.
The End of Economy Weekday Hours parameter
determines when economy hours end.
If Set Too High
Not applicable.
If Set Too Low
Not applicable.
Min
0000
(12:00
AM
)
Max
2359
(11:59
PM
)
Default
Blank
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
AMIS Parameters - #46
End of Economy
Weekday Hours
This parameter defines the system-wide end of economy
dispatch hours during the week. During economy hours,
the Octel 50 system sends any casual or administered
network messages marked for economy dispatch since
the end of economy hours the previous day.
Содержание Octel 50
