Avaya Octel 50, Руководство по установке

Страница: 147 / 304

Setting Up the System Configuring System Setup Parameters
Octel 50 Installation Guide 8-87
Related Parameters/Features The Location of Mailbox Number and the Start at the End of
String parameters work together. For example, if the
incoming string is 9*1123 and the mailbox number is 123,
the Number of DID Digits to use is 6, the DID Code is 9*1,
the Location of Inband Signaling Code is 1, and, if Start at
End of String is set to Yes, the Location of Mailbox Number
is 3. If Start at End of String is set to No, the Location of
Mailbox Number is set to 4.
If Set Too High
Not applicable.
If Set Too Low Not applicable.
Min
1
Max
99
Default
1
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Inband Code Default - #163
Start at End of
String
This parameter specifies whether the system starts at the
end of the default inband signaling string when counting
digits to locate the start of the mailbox number.
When/How to Use Enable this parameter if variable-length strings are used.
Related Parameters/Features The Location of Mailbox Number and the Start at the End of
String parameters work together. For example, if the
incoming string is 9*1123 and the mailbox number is 123,
the Number of DID Digits to use is 6, the DID Code is 9*1,
the Location of Inband Signaling Code is 1, and, if Start at
End of String is set to Yes, the Location of Mailbox Number
is 3. If Start at End of String is set to No, the Location of
Mailbox Number is set to 4.
If Set Too High Not applicable.
If Set Too Low Not applicable.
Min
–
Max
–
Default
No
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Inband Code Default - #164
Off Hook Delay
Time (OFFHDLY)
This parameter determines the delay, in 10 millisecond
units, after the Octel 50 system takes a port off hook, before
it starts DIDTIME.
When/How to Use This parameter is set when the Integrator utility is run. You
should not need to change it.
Related Parameters/Features If the Total Number of DID Digits is set to 0, this parameter
is not available.
DIDTIME does not begin until OFFHDLY is reached.
If Set Too High
The Octel 50 system may regularly miss one or more inband
digits at the beginning of the string.
If Set Too Low The Octel 50 system may prematurely drop incoming calls.