Avaya Octel 50, Руководство по установке

Страница: 293 / 304

Understanding Phrase Files and Using V-Edit Using Rhetorex V-Edit
Octel 50 Installation Guide 14-43
Dialing into V-Edit
Use the following procedure to dial into V-Edit. You must dial into V-Edit to be able to
listen to and record phrases.
To dial into V-Edit:
1. Complete the procedure Starting Rhetorex V-Edit.
2. Dial the extension connected to the audio channel you specified in step 5 or 6 under
the procedure Starting Rhetorex V-Edit. For example, if you selected audio channel 2,
dial the extension connected to channel 2 on the voice board. The extension you dial
should not be part of a hunt group since the channel you connect to must be the
channel you specified as the audio channel.
3. When you hear the ring signal, press <F4> to take the line off-hook.
Opening an Existing Phrase
Use the following procedure to open an existing phrase. V-Edit has two phrase display
windows, Main and Other, so you can display two phrases at a time.
To open an existing phrase in V-Edit:
1. Complete the procedures Preparing an Existing Phrase File for Use with V-Edit,
Starting V-Edit, and Dialing into V-Edit. The Voice Editor Main Menu displays the Main
phrase window, which is empty. If you want to open a phrase in the Main window,
proceed to step 3.
2. If you want to open a phrase in the Other window, press <O> to move the Other
phrase window to the foreground.
3. Press <G>.
4. When prompted, enter the complete name of the phrase you want to review then
press <ENTER>. For example, to review phrase D2001.LIN type
D2001.LIN
then
press <ENTER>. A graphical representation of the phrase is displayed in the
foreground window. You may now review or edit the phrase.
If you want to open a new phrase in the Main or Other window, bring the window in which
you want to open the phrase to the foreground, press <C> to clear the current phrase,
and when prompted to confirm, press <Y>. Otherwise, the phrase you open will be
appended to the current phrase.
Reviewing an Existing Phrase
Use the following procedure to review an open phrase in V-Edit.
To review an existing phrase in V-Edit:
1. Complete the procedures Preparing an Existing Phrase File for Use with V-Edit,
Starting V-Edit, Dialing into V-Edit, and Opening an Existing Phrase.
2. To review the phrase in the foreground, press <P>. If you only want to listen to a
portion of the phrase, see the topic, “Selecting a Segment of a Phrase,” later in this
chapter.
3. If you want to swap the foreground and background phrases, press <O>.