Avaya Octel 50, Руководство по установке

Страница: 87 / 304

Setting Up the System Configuring System Setup Parameters
Octel 50 Installation Guide 8-27
AMIS Parameters - #42
Country Code
This parameter defines the dialing code for the country in
which the Octel 50 system is located.
The Octel 50 system transmits the Country Code to remote
systems when it dispatches both casual and administered
network messages. This allows remote sites to reply directly
to messages you send them.
The Country Code must be defined for network
transmissions to be successful.
When/How to Use Enter the Country Code for the country in which the Octel 50
system is located. The Country Code for the United States
is 1.
The minimum and maximum for this parameter refer to the
length of the entry allowed, not an actual number.
Related Parameters/Features The Octel 50 system uses the Country Code to determine if
the International Access Code is required for network
replies.
If Set Too High Not applicable.
If Set Too Low Not applicable.
Min
0
Max
32
Default
Blank
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
AMIS Parameters - #43
Permit Inbound
AMIS Dispatch
This parameter determines whether the Octel 50 system is
permitted to receive AMIS messages.
When/How to Use When you enable this parameter, all subscribers on the
Octel 50 system able to receive messages from local
subscribers can also receive AMIS messages.
Related Parameters/Features If Permit Inbound AMIS Dispatch is enabled but Permit
Outbound AMIS Dispatch is disabled, subscribers can
receive network messages but cannot send or reply to them.
If Set Too High Not applicable.
If Set Too Low Not applicable.
Min
–
Max
–
Default
No
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
AMIS Parameters - #44
Permit Outbound
AMIS Dispatch
This parameter determines whether the Octel 50 system
can send network messages and replies.
When/How to Use Permit Outbound AMIS Dispatch controls the ability to send
network messages and replies from the Octel 50 system.