Avaya Octel 50, Руководство по установке

Страница: 82 / 304

Setting Up the System Configuring System Setup Parameters
Octel 50 Installation Guide 8-22
If Set Too Low If you set this parameter to 0, automatic call forwarding is
not used, and callers will only be allowed to dial another
extension, leave a message, or disconnect.
Min
0
Max
99
Default
10
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Subscriber Parameters - #35
Set Initial
Password for
New Mailboxes
to 1111
This parameter determines whether the Octel 50 system
assigns the password 1111 to all mailboxes created over
the phone by the supervisor.
When/How to Use If this parameter is disabled, the supervisor must enter an
initial password when creating mailboxes over the phone.
Note that when creating mailboxes onscreen, the initial
password is always set to 1111, regardless of this
parameter.
Related Parameters/Features If Minimum Length of Password is greater than 4,
subscribers are prompted to enter a new password that
complies with the minimum.
If Set Too High Not applicable.
If Set Too Low
Not applicable.
Min
–
Max
–
Default
Yes
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Caller Parameters
The Caller parameters control whether outside callers are allowed to leave multiple
messages during a single call and whether they can access subscriber directories.
Caller Parameters - #36
Permit Callers to
Leave Multiple
Messages
This parameter determines whether outside callers are
allowed to leave multiple messages for Octel 50 system
subscribers during a single phone call.
If you enable this parameter, the Octel 50 system voices an
option to disconnect along with the options to try another
extension or transfer to the operator.
If you disable this parameter, callers are politely
disconnected after leaving a single message.