Avaya Octel 50, Руководство по установке

Страница: 248 / 304

Testing and Troubleshooting the Octel 50 System Using the Command Line Interface
O
CTEL
50 I
NSTALLATION
G
UIDE
13-46
Dropping Ports
Use the following procedures to drop system ports. When you use the drop command,
current calls are immediately terminated and the port is reset to answer another call.
To drop a port:
1. Press <ESC> to close the active display and active the menu bar.
2. Select Command Line from the Display menu.
3. From the Command Line, type
DROP n
then press <ENTER> where n is the
number of the port you want to drop. For example, to immediately terminate
communication on the first port, from the Command Line, type
DROP 0 then press
<ENTER>.
To drop all ports, type
DROP ALL
then press <ENTER>.
Restarting the System
Use the following procedures to restart the Octel 50 system. The restart command
instructs the system to reinitialize the voice board. All channels are disabled first. The
voice board must be reinitialized to recognize any changes made that affect the board.
To restart the system:
1. Press <ESC> to close the active display and active the menu bar.
2. Select Command Line from the Display menu.
3. From the Command Line, type
RESTART
then press <ENTER>.
Shutting Down the System
Use the following procedures to shut down the Octel 50 system. This command shuts
down system operations and returns to the operating system. Unoccupied ports are
disabled to prevent further incoming calls. Each occupied port is automatically disabled
after current calls are terminated. Once all ports are disabled, the system shuts down and
returns to DOS.
To shut down the system:
1. Press <ESC> to close the active display and active the menu bar.
2. Select Command Line from the Display menu.
3. From the Command Line, type SHUTDOWN then press <ENTER>.
You can also shut down the system by selecting Exit from the File menu.
Performing a Force System Shutdown
Use the following procedures to perform a force system shutdown. Unlike the
SHUTDOWN command, this command shuts down the system without regard to current
calls. Activity on all ports is immediately terminated. This command should only be used
as a last resort to shut down the system.