Mitsubishi A1SD75M1, User Manual

Page: 14 / 746

A - 12
About Manuals
The following manuals are also related to this product.
In necessary, order them by quoting the details in the tables below.
Related
MANUALS
Manual Name
Manual Number
(Model Code)
AD75M1/M2/M3 Positioning Module User's Manual (Hardware)
The AD75M1/M2/M3 positioning module performance specifications, input interface, names of each part
and startup procedures, etc., are explained. (Enclosed with module)
IB-66735
(13J885)
A1SD75M1/M2/M3 Positioning Module User's Manual (Hardware)
The A1SD75M1/M2/M3 positioning module performance specifications, input interface, names of each
part and startup procedures, etc., are explained. (Enclosed with module)
IB-66734
(13J884)
Positioning module software package type SW1IVD-AD75P Operating Manual
The methods of creating data (parameters, positioning data, etc.), transmitting the data to the module,
monitoring the positioning and testing, etc., using the above software package are explained.
(Enclosed with each software package product)
IB-66714
(13J915)
GX Configurator-AP Version 1 Operating Manual
The methods of creating data (parameters, positioning data, etc.), transmitting the data to the module,
monitoring the positioning and testing, etc., using the above software package are explained.
(Enclosed with each software package product)
IB-66900
(13J948)
Conformation to the EMC Directive and Low Voltage Instruction
For details on making Mitsubishi PLC conform to the EMC directive and low voltage
instruction when installing it in your product, please refer to Chapter 3, “EMC Directive
and Low Voltage Instruction” of the using PLC CPU module User's Manual
(Hardware).
The CE logo is printed on the rating plate on the main body of the PLC that conforms
to the EMC directive and low voltage instruction.
To make this product conform to the EMC directive and low voltage instruction, please
refer to section 4.3.1 “Precautions for wiring”