Mitsubishi A1SD75M1, User Manual

Page: 62 / 746

3 - 10
MELSEC-A
3 SPECIFICATIONS AND FUNCTIONS
3.3.4 Combination of AD75 main functions and auxiliary functions
With positioning control using the AD75, the main functions and auxiliary functions can
be combined and used as necessary. A list of the main function and auxiliary function
combinations is given below.
Functions characteristic
to machine zero point
return
Auxiliary functions
Main functions
Combination with
operation pattern.*
1
Zero point return retry
function
Zero point shift function
Machine zero point return control
Zero point return
control
High-speed zero point return control – –
1-axis linear control – –
2-axis linear
interpolation control
– –
1-axis fixed-dimension
feed control (Continuous path control
cannot be set)
– –
2-axis fixed-dimension
feed control
(interpolation)
(Continuous path control
cannot be set)
– –
Position control
2-axis circular
interpolation control
– –
Speed control
(Only independent positioning
control can be set)
– –
Speed/position changeover control
(Continuous path control
cannot be set)
– –
Current value change
(Continuous path control
cannot be set)
– –
Main positioning
control
Other control
JUMP command
(Independent positioning
control cannot be set)
– –
JOG operation – –
Manual control
Manual pulse generator operation – –
: Always combine, : Combination possible, : Combination limited, : Combination not possible, –: Setting invalid
*
1
The operation pattern is one of the "positioning data" setting items.
*
2
Disabled for a start of positioning start No. 9003.