Mitsubishi A1SD75M1, User Manual

Page: 272 / 746

5 - 182
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
Setting item Setting details
Cd.27 Step mode
•
When using step operation, set which unit to step with.
Cd.28 Step start information
•
When using step operation, set whether to continue or restart operation.
Cd.29 Skip command
•
Set "1" to skip the current positioning.
Cd.30 New torque value
•
To change the " Md.45 Torque limit stored value", set the new estimated torque
limit stored value.
•
Set the value within the " Pr.18 Torque limit setting value" range.
Cd.31 Positioning starting point No.
•
Set the "start point No. (1 to 50)" for executing block start (positioning).