![background image](http://html1.mh-extra.com/html/ducati/999r-2006/999r-2006_repair-manual_2537638418.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Motore
Engine
sezione / section
N 4.5
88
999R
- M.Y. 2005 - edizione/edition 00
Reassembling the head
unit
Notes
The bare heads are identical.
Only their definition as intake and
exhaust side configures them for
installation on the vertical or
horizontal cylinder.
All the figures in this chapter refer
to a vertical head.
In the text, the head is identified
along the longitudinal axis by its
intake and exhaust sides and, along
the transverse axis, by its timing and
opposite side (water fitting side).
Reinstalling the valve guide
seal rings
Position the bare head on the
provided support
88713.2346
.
If fitting a new head (26), check
that the internal support (27) for
the closing rocker arm shafts is
mounted at the sparkplug seat.
Use engine oil to lubricate the
valve guide seal rings (8) and
insert them from the spring side
onto tool part no.
88713.1429
.
Fit the end of the tool into the valve
guide and use a mallet to tap the seal
rings (8) home into the guides.
Composizione gruppo
testa
Note
Le teste nude sono uguali.
Solo la definizione del lato
aspirazione e scarico configura la
testa per il montaggio sul cilindro
verticale o orizzontale.
Tutte le figure di questo capitolo si
riferiscono ad una testa verticale.
Nel testo, la testa viene identificata, in
senso longitudinale, dal lato aspirazione
o scarico e, in senso trasversale,
dal lato distribuzione o opposto
distribuzione (lato raccordi acqua).
Rimontaggio anelli di tenuta
guidavalvola
Posizionare la testa nuda
sull'apposito supporto
88713.2346
.
In caso di montaggio di una testa (26)
nuova, verificare che in corrispondenza
del pozzetto candela sia montato il
supporto (27) di ritegno interno dei
perni bilancieri di chiusura.
Lubrificare con olio motore gli anelli
di tenuta (8) dei guidavalvola e
inserirli dal lato provvisto di molla
sull'attrezzo
88713.1429
.
Inserire l'estremità dell'attrezzo nel
guidavalvola e con martello portare in
posizione gli anelli di tenuta (8) sui
guidavalvola.
SCA
R
ICO/EXHAUST
SCARICO/
EXHAUST
ASPIRAZIONE/
INTAKE
ASP
IRAZ
ION
E/
IN
TAKE
26
26
27
8
8
Summary of Contents for 999R 2006
