![background image](http://html1.mh-extra.com/html/ducati/999r-2006/999r-2006_repair-manual_2537638415.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Motore
Engine
sezione / section
N 4.5
85
999R
- M.Y. 2005 - edizione/edition 00
Revisione guida valvola
Controllare la superficie interna dei
guidavalvola: non devono apparire
incrinature o deformazioni.
Procedere ad un accurato controllo
dimensionale del guidavalvola.
Per effettuare la misurazione del
diametro interno è necessario
disporre di un calibro per interni.
Rilevare il diametro in diverse
posizioni del guidavalvole.
Il gioco di accoppiamento al
montaggio deve essere:
valore maggiore riscontrato - valore
minore riscontrato
=
0,03÷0,045
mm.
Il limite di usura massimo ammesso é
di
0,08
mm.
Eseguire la sostituzione dei
guidavalvola in presenza di
ovalizzazione eccessiva o gioco con
lo stelo valvola fuori tolleranza.
Sostituendo il guidavalvola è necessario
sostituire anche la sede valvola.
Sono disponibili a ricambio guidavalvola
con maggiorazione sul diametro
esterno di
0,03, 0,06
e
0,09
mm.
Per eseguire la sostituzione operare
come segue:
riscaldare lentamente ed
uniformemente la testa fino alla
temperatura di
150°
C;
rimuovere i guidavalvola originali
utilizzando il punzone cod.
88713.0879
;
lasciare raffreddare la testa e
verificare le condizioni delle sedi;
scegliere i guidavalvola più idonei
per ottenere una interferenza di
montaggio con la testa di
0,022÷0,051
mm; riscaldare nuovamente la testa e
raffreddare con ghiaccio secco i
guidavalvole nuovi;
lubrificare le sedi sulla testa ed
installare i guidavalvola utilizzando gli
appositi attrezzi e facendo riferimento
alla quota (A) riportata in figura;
A
=
24,4±0,15
mm.
Ripassare un alesatore per rendere
più uniforme la superficie di
accoppiamento.
Overhauling the valve guide
Check inner surface of valve guides
for cracking or distortion.
Thoroughly check the dimensions of
the inner surface of the valve guide.
Measure inner diameter with a gauge
for bore diameter measurement.
Measure the diameter at different
positions of the valve guide.
Assembly clearance must be:
highest measured value – lowest
measured value =
0.03 - 0.045
mm.
Max. wear limit allowed:
0.08
mm.
Change valve guide when out of
round exceeds permissible limit or
clearance with valve stem is
outside tolerance range.
When you change the valve guide,
you must also change the valve seat.
Spare valve guides are available
with outer diameter oversized by
0.03, 0.06
and
0.09
mm.
Change valve guides as follows.
Heat up head gradually and evenly
up to
150°
.
Remove original valve guides using drift
part no.
88713.0879
; allow the head to
cool down and check seat condition;
select the most suitable valve guide
so as to obtain an assembly clearance
with the head of
0.022 - 0.051
mm;
heat the head up again and chill the
new valve guides with dry ice;
lubricate seats in the head and
install the valve guides using the
special tools and referring to
dimension (A) given in the figure;
A
=
24.4±0.15
mm.
Hone the mating surface with a
bore reamer to ensure an even fit.
A
A
Summary of Contents for 999R 2006
