![background image](http://html1.mh-extra.com/html/ducati/999r-2006/999r-2006_repair-manual_2537638414.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Motore
Engine
sezione / section
N 4.5
84
999R
- M.Y. 2005 - edizione/edition 00
Revisione sede valvola
Controllare visivamente le sedi:
non devono presentare tracce di
vaiolature o incrinature. Riscontrando
lievi danni è possibile eseguire una
fresatura utilizzando le apposite
frese monotaglienti a
45°
e
60°
.
Eseguire poi la smerigliatura delle
valvole e la verifica della tenuta.
In caso di danni eccessivi alle sedi
valvola è possibile eseguirne la
sostituzione utilizzando sedi maggiorate
di
0,03
e
0,06
mm, sul diametro
esterno, disponibili a ricambio.
Importante
In caso di sostituzione delle
sedi, è necessario sostituire anche i
guidavalvola.
Operare come segue:
Rimuovere le sedi usurate fresandole
con cautela per non danneggiare
l'alloggiamento sulla testa.
Controllare il diametro degli
alloggiamenti sulla testa e scegliere la
sede valvola maggiorata più idonea,
considerando una interferenza di
montaggio di
0,04÷0,10
mm.
Scaldare lentamente ed
uniformemente la testa fino ad una
temperatura di
150°
C e raffreddare
le nuove sedi con ghiaccio secco.
Piantare le sedi perfettamente in
quadro nel proprio alloggiamento
utilizzando gli appositi punzoni sedi
dei guidavalvole.
Lasciare raffreddare la testa e
quindi procedere alla lavorazione
delle sedi facendo riferimento alle
seguenti quote:
CA = Ø39,1± 0,025
mm
CS = Ø31,6± 0,025
mm
S = 1,205
mm
D = 0,7÷0,9
mm
Importante
Non usare pasta smeriglio dopo
la fresatura finale.
Overhauling the valve seat
Visually inspect valve seats for
cracking or pitting. Minor damage
can be repaired by milling with special
45°
and
60°
single-blade cutters.
Grind valves and run a leak test.
If valve seat is excessively damaged,
fit oversized seats. Replacement seats
are available with
0.03
and
0.06
mm
oversized outer diameters.
Important
When you change the valve
seats, change the valve guides as
well.
Proceed as follows:
Remove the worn seats. Mill carefully
to avoid any damage to head bores.
Check diameter of head bores and
choose the oversized valve seat
that will give an interference fit of
0.04- 0.10
mm.
Heat the head gradually and evenly
up to
150°
and chill the new valve
seats in dry ice.
Drive the seats perfectly square into
the head bores using the appropriate
valve guide seat drifts.
Allow head to cool down and machine
seats to following dimensions:
CA = Ø39.1± 0.025
mm
CS = Ø31.6± 0.025
mm
S = 1.205
mm
D = 0.7 – 0.9
mm
Important
Do not use grinding paste after
final milling.
60 45
24±0.02
16±0.02
CA
D
S
S
D
CS
Summary of Contents for 999R 2006
