Test the System
LED Indicators
SI Installation and Upgrades
493
June 2004
Figure 187: Example System Status Report for All Cabinets
Return to Task List
Test Expansion Interface Circuit Packs
Return to Task List
Check each Expansion Interface (EI) circuit pack in the system.
1
Type
test board
UUCSS
where
UUCSS
is the cabinet, carrier, and slot for an Expansion Interface
(EI) circuit pack in the system, and press Enter.
NOTE:
Labels on the port network and carrier and on the strip under the circuit pack contain this
information.
2
Verify the screen displays test results similar to
Figure 188, Sample Test Results for Expansion
Interface Board 2A01,
on page 494. This example is for board 2a01.
3
If any result is
FAIL
, check the connections for the fiber optic link.
4
Repeat Steps 1 and 2 for each Expansion Interface circuit pack.
