Install and Wire Telephones
Task List: Install the Remote Network Interface
524
SI Installation and Upgrades
June 2004
Task List: Install the Remote Network Interface
1
Install the Remote Network Interface
on page 524
2
Install Off-Premises Station Wiring
on page 525
Figure 201: Connections at Trunk/Auxiliary Field
Install the Remote Network Interface
Return to Task List
You must obtain the product identification and the INADS OSS telephone number from the NTSO or the
TSC before you begin to install the Remote Network Interface.
Figure 202, Connections at Trunk/Auxiliary Field,
on page 525 shows a typical Remote Network
Interface trunk installation.
1
Determine the network interface trunk appearance at the green trunk/auxiliary field.
2
Label the terminals for the trunk appearance.
3
Install jumpers between the trunk appearance and Remote Network Interface terminals.
4
Enter
change system-parameters maintenance
and press Enter.
5
Enter the ten-digit product identification. Enter the INADS OSS telephone number in the
First
OSS Telephone Number
field.
6
Enter first-only in the
Alarm Origination to OSS Numbers
field and press Enter to
enable Alarm Origination (to the first OSS).
Figure notes
1
To Network Interface Facility
2
To Control Carrier Auxiliary
Connector
3
One Pair of Wires
4
Twenty-fifth Pair of RJ21X
Network Interface Jack
25
50
IN
r758482b RBP 062696
