Bring the System Online
Task List: Administer the System
SI Installation and Upgrades
469
June 2004
Figure 173: Cabinet Administration form
Return to Task List
Add Cabinet 2 through N (AvayaDEFINITY Server r)
Return to Task List
1
Type
add cabinet
<2-44>
and press Enter. See
Figure 174, Typical Add Cabinet Form,
on page
470.
2
Fill in the blanks as required by the location and nature of the cabinet.
Number
Display-only field. Consists of two fields: the
Designator
and
Number
fields. The
Designator
field contains one of the
following entries:
PN — If the carrier is a port carrier, processor carrier, or unused
carrier.
SN — If the carrier is a switch node carrier, or duplicate switch
node carrier.
The
Number
field contains either the switch node number or port
network number.
Duplicate
The location for the duplicate of a switch node. Only displays
when administration of PNC Duplication is enabled. If the
Carrier Type
is dup-switch-node, the field displays the
three-character carrier address of the duplicate. The first two
characters represent the cabinet number; the third character
represents the carrier (A through E).
This is a display-only field if the
Carrier Type
field is
switch-node.
Carrier Descriptions
Page 1 of 1
CABINET
CABINET DESCRIPTION
Cabinet: 1
Cabinet Layout: five-carrier_________
Cabinet Type: processor_____________
Number of Portnetworks: 1
Survivable Remote EPN: _
Survivable Remote Processor ID: _____
Room: __________
Floor: __________
Building: __________
CARRIER DESCRIPTION
Carrier Carrier Type Number Duplicate
C port_____________
PN
01
___
B processor________ PN 01
___
A
processor
PN 01
___
X Fan
D dup-sw-node______
SN 01
01E
E switch-node______
SN 01
01D