Avaya MCC1 Installation And Upgrades Download Page 169

Page: 169 / 874

G3V4vs/R5vs/R6vs to Avaya Communication Manager

Task List: DEFINITY vs to Avaya Communication Manager

SI Installation and Upgrades

169

June 2004

In the

Alarm Origination

field choose:

— DON’T CHANGE to leave the product’s current alarm origination status unchanged (the

common choice for upgrades).

— YES to enable alarm origination.

— NO for no alarm origination.

In the

Alarm Destination

field, choose

— DON’T CHANGE to leave the product’s currently-administered alarm origination number

unchanged (the common choice for upgrades).

— SET NUMBER TO and type the complete alarm destination telephone number, including

any dialing prefix (for example, “9” or “*9”). The default value in this field is the TSO-
Denver number (18005353573).

Click on the Continue Registration button at the bottom of the page.

ART begins automatically registering the product and displays progress messages to indicate the
current status.

CAUTION:

DO NOT exit your browser or click on the Refresh, Back, Stop, or Home buttons while
ART displays these progress messages.

If you have to abort your registration, click on the Abort Session button that appears with
one of the progress messages.

If the preceding steps have been completed successfully, ART displays the DEFINITY Upgrade
Registration Report.

Review the information displayed in the report.

If any of the data are incorrect, contact the DBA Group (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2) immediately for assistance.

Save the DEFINITY Upgrade Registration Report in a file for future reference or print the report
and keep the copy.

Return to Task List

Restore announcements [from
G3V4vs/R5vs/R6vs]

Return to Task List

This step is not required for systems using TN750C announcement circuit packs. You must restore
announcements for the TN750 or TN750B

Type

restore announcements

and press Enter.

This command takes about 45 minutes to execute.

Summary of Contents for MCC1











































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MCC1

Reviews:

Related manuals for MCC1

Brands by name

Popular brands

Avaya MCC1, Installation And Upgrades

Search results

Summary of Contents for MCC1

Reviews:

Related manuals for MCC1

Brands by name

Popular brands