Bring the System Online
Task List: Administer the System
470
SI Installation and Upgrades
June 2004
Figure 174: Typical Add Cabinet Form
Return to Task List
Set Country Options
Return to Task List
Certain country options need to be set to turn red failure indication LEDs off. Refer to
Table 16, Country
Codes,
on page 471 for a list of country codes.
1
Type
change system-parameters country options
and press Enter.
A screen similar to
Figure 175, Typical System Parameters Country-Options Screen,
on page 472
is displayed. The cursor is set on the
Companding Mode
line.
2
If the country uses A-Law companding, type A-Law and press Enter.
The default companding mode is mu-Law.
Other items eventually need to be entered on this screen, but this is all that must be done to turn
the red alarm LEDs off.
3
If all red LEDs do not go off, reseat (unplug and reinsert) any port circuit packs displaying red
LEDs.
CAUTION:
To avoid a disk crash, never reseat the DEFINITY AUDIX System without first shutting it
down. Shut down the DEFINITY AUDIX System (and allow the disk to completely spin
down) before unplugging the assembly. See
DEFINITY AUDIX System Power
Procedures
on page 451 for the proper procedures.
Page 1 of 1
CABINET
CABINET DESCRIPTION
Cabinet: 5
Cabinet Layout: _____________________
Cabinet Type: expansion-port network
Number of Portnetworks: 1
Survivable Remote EPN: _
Survivable Remote Processor ID: _____
Room: __________
Floor: __________
Building: __________
CARRIER DESCRIPTION
Carrier Carrier Type Number Duplicate
