Toshiba VP 300, Installation Instructions Manual

Page: 173 / 614

When a port is configured to use different INFORMATION Tables, only current information is
displayed.
The following example shows various items that can be displayed, including those added by optional
feature packages.
■
Port Mapping Status
The port mapping command displays information about the assignment of system port numbers to
ports configured in each slot. This command also displays the assignment of each port to an integration
unit. At the @ prompt type:
PRTMAP
If the PBX type is ATT75, each port may be assigned to more than one integration unit. If the PBX
type is not ATT75, each port may be assigned to only one integration unit and is also assigned a line
appearance number for that integration unit.
If a port is assigned to an integration unit and that port has the COS attribute for non-integration,
Attribute 58 — DO NOT USE THIS PORT FOR INTEGRATION, this command will print *** after
the integration information for the port. The discrepancy in the configuration must be resolved, either
by removing the COS attribute from the port, or removing the port from all integration units.
The following is an example of the PRTMAP without ATT75 assigned.
Enter
Toshiba VP Systems Release 7.1 July, 1994
MAINTENANCE
5-15
@L PRTMAP
SYSTEM
INTEGRATION LINE
PORT SLOT PORT EXTN SLOT/UNIT APPEARANCE
1 1 1 121 10/1 1
2 1 2 122 10/1 2
3 1 3 123 10/1 3
4 1 4 124 10/1 4
ID=0
5 2 1 125 10/1 5
@L PORT 1
CLASS OF SERVICE: 127
WITH ATTRIBUTES: 1 2 3 4 5 6 7 8 9
USE FOR OUTCALL: YES/NO ANSWERING MODE: AX/CX/MX/DX
PORT TYPE: LIC4/LIC8/DAC4/TLC8/FAX4/FAX8 TEST PORT: YES/NO
INFORMATION TABLE NUMBER: 127/ ERROR NO INFORMATION TABLE OR
INTERCEPT MAILBOX: 4932
IN ANOTHER CABINET
INTERCEPT MAILBOX: 3000 INTERCEPT EXTENSION:
PORT EXTENSION: 300 COMPANY GREETING MAILBOX: 4665
or NO PORT EXTENSION or NO COMPANY GREETING MAILBOX