Toshiba VP 300, Installation Instructions Manual

Page: 385 / 614

Action VP 300 Description and Response
12. @DISKO The following menu is presented:
13. Choose option 3 — The following is presented:
REPLACE A DISK.
14. Enter the number of The VP 300 displays the following screen. (There may be a delay
the drive slot to be before the screen appears.)
replaced.
15. Remove Software
Diskette #1 from the
floppy drive.
Reload the System
16. Make sure the
configuration backup
diskette is write-enabled.
17. Insert the configuration
backup diskette into
the FD.
18. Press the lower button To reload the system.
on the CPU.
:B4
Selected drive has been replaced.
:3
Select drive slot to be replaced: (Empty line = EXIT)
:
CURRENT STATUS
Slot Type ID Status Configured
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
B4 System1 S1 ACTIVE Configured
B3 System2 – – UNKNOWN Configured
C1 Voice1 – – EMPTY Not Configured
C2 Voice2 – – EMPTY Not Configured
C3 Voice3 – – EMPTY Not Configured
C4 Voice4 – – EMPTY Not Configured
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
Select option to be performed
(1–5, – Empty line = EXIT)
:
Enter
Toshiba VP Systems Release 7.1 July, 1994
PROCEDURES
6-71