Toshiba VP 300, Installation Instructions Manual

Page: 100 / 614

E. Leave a test message for telephone C.
☞
A message is not delivered to a mailbox unless it is at least 4.5 seconds in length. The
mailbox must be entered in the USER Table for the VP 300 to offer to take a message.
F. The VP 300 should now initiate a message waiting notification call (ASAP message waiting)
to the extension associated with telephone C.
☞
If all ports equipped are allowed to make outcalls, the call is not attempted when 3/4 or
more of the ports are being used. Also, for message waiting, INFORMATION Table,
Index 12 — MESSAGE WAITING NOTIFICATION, must be set to “Y” (Yes).
G. Does the VP 300 call the extension associated with Telephone C?
YES
➧
Continue.
NO
➧
Determine the cause and correct the problem before continuing.
H. Answer Telephone C. The VP 300 should respond with: “Extension XXX has X messages.
Ready,” or “Extension XXX has X messages. Please enter your security code.”
I. Enter the security code if asked, and press
5
to Listen to the test message.
J. Does the message sound clear?
YES
➧
Continue.
NO
➧
Determine the cause and correct the problem before continuing.
K. Press
3
to Erase the message, then press
9
to exit the mailbox. Does the VP 300 respond with
“X messages will be erased” ?
YES
➧
Press
9
to exit the system. The VP 300 should respond with “good-bye.”
NO
➧
Determine the cause and correct the problem before continuing.
Toshiba VP Systems Release 7.1 July, 1994
3-44 Installation and Maintenance Manual