Toshiba VP 300, Installation Instructions Manual

Page: 217 / 614

Toshiba VP Systems Release 7.1 July, 1994
MAINTENANCE
5-59
Table 5-3 Hardware Error Types and Remedies (continued)
Error Type:Name Source Remedy Priority
15: System Status
Error (continued) Temperature or
voltage out of range. Check DATA-1 for information
pertaining to what is out of range
and perform corrective action.* 3
16: Defect in hard
disk prompt area Defect in prompt
area logged into
Defect List Copy prompts from diskette to the hard
disk, using the Floppy Backup Restore
procedure. If errors repeat, possible
cause could be HD, VCU. 3
DATA-1 =
DATA-2 =
DATA-3 =
DATA-4 =
The DATA-1 field specifies the type of error. DATA-2 and DATA-3 are data associated with
the error.
DATA-1 = FAILURE CODE:
01 =
02 =
03 =
04 =
05 =
06 =
10 =
TEMPERATURE OUT OF RANGE
DATA-2::
DATA-3::
+5D (DIGITAL) SUPPLY OUT OF RANGE
+12A (ANALOG) SUPPLY OUT OF RANGE
–12A (ANALOG) SUPPLY OUT OF RANGE
+12D (DIGITAL) SUPPLY OUT OF RANGE
+5B (BATTERY) SUPPLY OUT OF RANGE
LINE CARD NOT ALLOWED
DATA-2 = FIRST PORT # OF LINE CARD NOT ALLOWED.
+41F to +113F (+5C to +45C)
+4.90 to +5.15V
+11.40 to +13.30V
–13.60 to –11.40V
+11.40 to +13.30V
+3.60 to +5.50V
01 = TOO HIGH
01 = TOO LOW
01 = BOTTOM SENSOR OR CARD
02 = TOP SENSOR OR CARD
00 = BOTH SYS DRIVES
01 = SYS DRIVE 1
02 = SYS DRIVE 2
LEAST SIGNIFICANT BYTE (Prompt number in HEX)
MOST SIGNIFICANT BYTE (Prompt number in HEX)
LANGUAGE SET # (1 TO N=n)