Toshiba VP 300, Installation Instructions Manual

Page: 483 / 614

☞
A message is not delivered to a mailbox unless it is at least 4.5 seconds in
length. The mailbox for phone B must be entered in the VP 300 USER Table or
the VP 300 does not offer to take a message.
F. Does the VP 300 light the message waiting indicator on phone B?
NO
➧
Determine the cause and correct the problem before continuing.
☞
It may take several seconds for the indicator to turn ON.
G. From phone B, call the VP 300 and enter mailbox B. The VP 300 should respond with
“You have one message. Ready…”
H. Listen to the test message. Does the message sound clear?
NO
➧
Determine the cause and correct the problem before continuing.
I. Press
3
to erase the message. Press
9
to exit the mailbox. Does the VP 300 respond
with “One message will be erased…”? Press
9
to exit the system. Does the VP 300
respond with “Good-bye…”?
NO
➧
Determine the cause and correct the problem before continuing.
J. Hang up phone B. Is the message waiting indicator turned OFF?
NO
➧
Determine the cause and correct the problem before continuing.
☞
It may take several seconds for the indicator to turn OFF.
11B.
MESSAGE WAITING FOR SYSTEMS NOT USING MESSAGE WAITING
INDICATION
This test verifies correct operation of message waiting notification for systems not
using Message Waiting Indication.
A. Set phone B to forward to the VP 300 on a busy condition by dialing the feature access
code for Call Forwarding – Busy followed by the VP 300 access number. After setting
forwarding for phone B, leave phone B off-hook so that it appears busy.
B. From phone A, call out and back in on a trunk that auto-terminates to the VP 300.
C. Does the VP 300 answer properly?
NO
➧
Determine the cause and correct the problem before continuing.
☞
If the VP 300 is equipped with IntraMessaging, you may prefer to use the Quick
Message feature to leave a message for phone B instead of following the
instructions of step D and sep E.
D. Dial the extension number of phone B. After the number of rings configured for ring-
no-answer forward in phone B’s PBX COS, the VP 300 should respond, “Extension
EXT-B is unavailable. Please leave a private message at the tone, dial another
extension number, or dial zero for assistance…”
E. Leave a test message for phone B. While recording the message, put phone B back
on-hook.
Toshiba VP Systems Release 7.1 July, 1994
MITEL SX-200 DIGITAL ADAPTIVE INTEGRATION 10.1-39