Toshiba VP 300, Installation Instructions Manual

Page: 573 / 614

C. From phone A, call the extension number of phone B. Does the Superset 4 ring
immediately?
NO
➧
Determine the cause and correct the problem before continuing.
D. Answer the Superset 4. Hang up the Superset 4, phone A, and phone B.
4.
PBX RING-NO-ANSWER FORWARD TEST
This test verifies that an extension can forward to the VP 300 on a ring-no-answer
condition.
A. Make sure phone B is on-hook.
B. From phone A, call the extension number of phone B. Does phone B ring?
NO
➧
Determine the cause and correct the problem before continuing.
C. After the duration specified by the Call Forward No Answer timer for phone B, does
phone B stop ringing and the Superset start ringing?
NO
➧
Determine the cause and correct the problem before continuing.
D. Answer the Superset. Hank up the Superset and phone A.
5.
PBX FORWARD ALL CALLS TEST
This test verifies that an extension can forward all calls to the VP 300 access number.
A. Set phone B to forward all calls to the Superset 4 by assigning phone B’s extension the
Call Rerouting Always Alternative that reroutes to the first MIC port in Day, Night 1,
and Night 2 operation. Make sure phone B is on-hook.
B. Using phone A, call the extension of phone B. Dos the Superset 4 start to ring?
NO
➧
Determine the cause and correct the problem before continuing.
C. Answer the Superset. Hang up the Superset and phone A. Change the Call Rerouting
Always Alternative assignments for phone B’s extension back to their previous
settings.
6.
MESSAGE WAITING INDICATOR TEST (FOR INSTALLATIONS USING THE VP
300 TO CONTROL MESSAGE WAITING INDICATORS)
This test verifies that a message waiting indicator can be set and cleared using the
Message Waiting – Activate and Message Waiting – Deactivate feature access codes.
A. Connect the superset 4 one of to the MIC port used for message waiting indicator
control and wait for the PBX to initialize the Superset 4.
B. Go off-hook on the Superset 4 and dial the Message Waiting – Activate feature access
code followed by the extension number of phone B. Does the PBX return dial tone
within three seconds?
NO
➧
Determine the cause and correct the problem before continuing.
C. Is the phone B message waiting indicator on?
Toshiba VP Systems Release 6.1 February, 1993
MITEL SX-2000 ADAPTIVE INTEGRATION 10.3-31