Toshiba VP 300, Installation Instructions Manual

Page: 186 / 614

Listing the CPT
To list the trace, at the @ prompt, enter:
LIST TRACE
A trace for specific activities can be selected from the menu as shown in the
following example.
☞
Only part of the time needs to be entered, but it is necessary to add
the year first. For example, 91 02 24 lists all information stored
starting with the first event stored for February 24 and continuing
to the current date and time. If the date and time entered precedes
the date and time for the data stored, the system starts reporting
events for the earliest date within the range specified. To select
the complete history stored, press
at the empty line. To
display current events, enter C (for continuous) and press
.
☞
A time stamp is recorded every minute. However, the only time
stamps displayed are the minute just before an activity and then
each minute until the activity ceases.
■
Fax CPT Result Codes (Release 7.1 or later)
CPT shows result codes (result: xx) for fax transactions as shown in the example below. The most
common result codes are listed below.
Toshiba VP Systems Release 7.1 July, 1994
5-28 Installation and Maintenance Manual
Enter
Enter
@LT
1 ALL ACTIVITIES
2 MAILBOX ACTIVITY
3 PORT ACTIVITY
4 LOCATION ACTIVITY
5 MESSAGE ACTIVITY
6 INTEGRATION ACTIVITY
7 APLINK ACTIVITY
SELECT TRACE TO BE LISTED (1 – 7, EMPTY LINE = EXIT).
:1
Enter start time: Year Month Day Hour Minute or C
(continuous)
:c
PORT
5 S10 U02 L01 DIRECT INT CALL 628
PORT 5 OFF HOOK
PORT 6 S10 U02 L01 DIRECT INT CALL 628
PORT 6 OFF HOOK
PORT 5 ON HOOK
TIME 10/09/90 06:36
PORT 61 MSG 2004 FAX PLAY DONE (result: 00)