Toshiba VP 300, Installation Instructions Manual

Page: 377 / 614

Toshiba VP Systems Release 7.1 July, 1994
PROCEDURES
6-63
Action VP 300 Description and Response
Reinstall the System
33. After the VP 300 has
booted from the hard disk,
insert the configuration
backup diskette into the FD.
34. @IN The VP 300 responds with the following:
The VP 300 then gives the following messages to indicate the status
of the reinstall.
Next, the VP 300 prompts you to insert the diskette.
When the pre-load is complete, the following message is printed:
A series of messages are printed to indicate which tables have been
pre-loaded. On completion, the following messages are printed:
When complete, the system header and the following message is
printed:
DAY MM/DD HH:MM:SS YYYY (SYSTEM NAME) ID:000 SN:000000 PBX: 00
– – – – – – – – – – – – – – – SYSTEM INSTALLATION COMPLETED– – – – – – – – – –
INSTALL COMPLETE.
WAIT. . . DONE.
SAVE configuration to a diskette? (Y/N, empty line = N).
Enter N:
:N
TABLE PRE-LOAD COMPLETE
Do you wish to set the system DATE and TIME? (Y/N, empty line = N)
CLEARING ALL TABLES. . . DONE.
INITIALIZING ALL USER DIRECTORIES. . . DONE.
Do you wish to PRE-LOAD any table from a previous INSTALL
from your DISKETTE? (Y/N, empty line = N)
:Y
Insert desired DISKETTE in drive. Press RETURN when ready…
PRE-LOAD ALL configuration tables?
:Y
– – – – – – – – – – – – – – – SYSTEM INSTALLATION DIALOG– – – – – – – – – – –
DAY MM/DD HH:MM:SS YYYY (SYSTEM NAME) ID:000 SN:000000 PBX: 00
NEW CONFIGURATION INSTALLATION.
Enter
:Y
:N
Enter
:Y Enter
Enter