Toshiba VP 300, Installation Instructions Manual

Page: 273 / 614

6. Modify the required application delay(s).
In this case, Application Delay index 54 would be changed from 800ms to 760ms.
Decreasing Index 54 allows for the 790ms TONE ON.
☞
Index 50 must be equal to or less than Index 54.
7. After modifying the appropriate delay(s), remove Attribute 70 and retest the calls that
failed in step 1.
If calls still fail, repeat from step 1.
■
Modifiable Application Delay Indexes
The application delay indexes that can be modified at maintenance level while in UPDATE are
listed below, along with a description of what the delay does and how to use it.
Application Delay
8
WAIT AFTER OFF HOOK BEFORE GIVING PROMPT
Application Delay 8 causes a delay between the time the port goes off
hook and the time the greeting or system prompt is played.
Use — If the PBX is slow in cutting the speech paths through, it
could cause greetings or prompts to be clipped (only part of the
greeting or prompt is heard). Modify Application Delay 8 to delay
longer before playing the greeting or prompt.
Toshiba VP Systems Release 7.1 July, 1994
MAINTENANCE 5-115
1200ms
800ms
980ms
1200ms
800ms
1000ms
2880ms
2800ms
3400ms
2920ms
2800ms
3400ms
1200ms
800ms
790ms
1
1
2
3
1
2
3
2
3
Answer Condition
Maximum Tone ON (53)
Minimum Tone ON (54)
Actual Time Tone was ON
1
2
3
Actual Time Tone was OFF
Minimum Tone OFF (56)
Maximum Tone OFF (55)
PBX Tone ON
PBX Tone OFF
Figure 5-21 Ring/No Answer Tone Timing Failure