Toshiba VP 300, Installation Instructions Manual

Page: 547 / 614

Call Rerouting Example
Here is an example of how Call Rerouting may be specified to include the VP 300. Figures
10.3-1 through 10.3-4 show the Call Rerouting form entries for this example.
Coverage Conditions
•
Reroute internal calls and TIE trunk calls to coverage if station is RNA.
•
Reroute CO and DID trunk calls to coverage if station is busy or RNA.
•
Reroute all CO and DID trunk calls to the VP 300 during Night 1 service, and all calls
to the attendant during Night 2 service.
•
Apply Do Not Disturb to all types of incoming calls.
Rerouting Alternative Answer Points
•
The First Alternative answer point is the VP 300.
•
The Second Alternative answer point, in the event the VP 300 fails to answer the call,
is the attendant.
Toshiba VP Systems Release 6.1 February, 1993
MITEL SX-2000 ADAPTIVE INTEGRATION 10.3-5
Figure 10.3-1
Call Rerouting First Alternative Assignment Example
CALL REROUTING FIRST ALTERNATIVE ASSIGNMENT
Busy/DND
Originating Device
First
Alternative
Number
Directory
Number
Routed To
Intercept Type
No Answer
Originating Device
DID TIE CO Int DID TIE CO Int
This Normal This Normal This This This This FA# VP 300#
Figure 10.3-2
Call Rerouting Second Alternative Assignment Example
CALL REROUTING SECOND ALTERNATIVE ASSIGNMENT
Busy/DND/No Answer
Originating Device
Second
Alternative
Number
Directory
Number
Routed To
DID TIE CO INTERNAL
This This This This SA# ATT#