Toshiba VP 300, Installation Instructions Manual

Page: 156 / 614

Quick Reference Guide
Maintenance
Section Subject Command Information
Integration
Integration Cards UPINTG Restarts the integration cards and therefore
(continued)
disrupts call processing for approximately one
to two minutes.
Traffic Pegs Integration Board C I x y Clears the integration board pegs.
x = slot number; y = unit number.
Traffic Peg Count L P Lists the pegs.
Table
C P Clears the pegs.
Miscellaneous
Message Purge APURGE x y z Starts the message purge function if Automatic
Message Purge is not already in progress. Displays
the thresholds specified and asks for confirmation
before initiating the message purge function.
x = save threshold, y = new threshold,
z = Net Name.
Baud Rate BAUD Displays the current baud rate setting. The
available baud rates are 300, 600, 1200, 2400,
4800, 9600, and 19200.
Message Purge CPURGE Cancels message purge if it is in progress,
regardless of whether it was initiated automatically
or by the APURGE command. Asks for
confirmation before cancelling message purge.
Back up and FLOPPY Used to back up and restore greetings, names,
Restore scripted and sequential messages, and personal
distribution list names. Also used to load system
prompts.
Toshiba VP Systems Release 7.1 July, 1994