Toshiba VP 300 Installation Instructions Manual Download Page 389

Page: 389 / 614

Action

VP 300 Description and Response

Reload the System

14. Make sure the

configuration backup
diskette is write-enabled.

15. Insert the configuration

backup diskette into the
FD.

16. Press the lower button

To reload the system.

on the CPU.

17. Press

twice.

To display the boot process.

18. Log on to the system

when it comes back up,
using the old
maintenance password.

19. Perform the standard

Refer to INSTALLATION, Testing, in this manual.

procedures (i.e., calling
a ring no answer, busy
extensions, etc.) to
verify normal system
operation.

Add System Features

20. Add Name/Greeting

Refer to the Electronic Feature Delivery/Removal section of this

Redundancy and/or

chapter for procedures on how to add system features.

Message Redundancy.

21. To activate redundancy,

refer to the

Feature

Description manual —
HARD DISK
REDUNDANCY.

Enter

Toshiba VP Systems Release 7.1

July, 1994

PROCEDURES

6-75

Summary of Contents for VP 300







































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VP 300

Reviews:

Related manuals for VP 300

Brands by name

Popular brands

Toshiba VP 300, Installation Instructions Manual

Search results

Summary of Contents for VP 300

Reviews:

Related manuals for VP 300

Brands by name

Popular brands