Toshiba VP 300, Installation Instructions Manual

Page: 287 / 614

■
Configuring the CDR Log
Until the CDR log is configured to save transaction records, no records are saved. To save
transaction records, specify the combinations of transaction types and status values that should
be saved. Transaction type indicates the specific type of calling event to be logged (e.g., call to
a mailbox, call to a personal assistant, etc.). Status indicates what happened when a call was
placed or a message delivery was attempted.
The Call Detail Record Log feature has commands to:
•
Set the specific transaction types and status value combinations used to save transactions in
the CDR log.
•
Display specific transaction type and status value combinations set as well as the entire log.
•
Clear the transaction type and status values used.
•
List transactions currently saved in the CDR log in a predefined format.
■
Setting CDR for Type and Status
To begin recording call detail records, the desired combinations of transaction types and
status options must be enabled, since the VP 300 does not set any combinations to be
enabled by default.
To configure the type/status combinations to be logged, at the @ prompt, enter:
CDRENA S t s
where t is one of the transaction types as abbreviated in Table 5-5 and s is one of the status
values as abbreviated in Table 5-6.
A single status or a list of status values may be entered in a single command line, but
transaction types must be specified independently.
If a type is specified without indicating status value(s), the system asks whether all status
values are to be included. If neither type nor status is specified, the system proceeds type
by type to ask whether all status values are to be enabled.
@CDRENA S NTMSGD FLLQ FLBU FLDX QUE
Enter
Toshiba VP Systems Release 7.1 July, 1994
MAINTENANCE 5-129