Toshiba VP 300, Installation Instructions Manual

Page: 198 / 614

Toshiba VP Systems Release 7.1 July, 1994
5-40 Installation and Maintenance Manual
# Name Description
49 ALT NO DIAL: No dial tone on ALTERNATE TRANSFER CODE
Number of times NO DIAL TONE was received when attempting the
ALTERNATE transfer string.
50 BROADCAST: BROADCAST messages sent
Number of BROADCAST messages sent.
51 RESET INTEGR:
RESET INTEGRATION UNIT (Release 6.1 or later)
58
Applies only to integration units on integration cards. Number of times
the VP 300 RESET the integration card. Could be caused by various
conditions. The VP 300 does not RESTART.
67 MSG SND FAILED: Message Send Failed
Number of times message failed to be delivered because mailbox full or
set not to accept messages.
70 SUBSEQ CALLS:
SUBSEQUENT CALLS
Number of mailboxes dialed AFTER PLACING INITIAL CALL.
71 MSG WT BUSY:
Message Waiting calls to BUSY extensions
Number of calls Message Waiting placed to BUSY extensions.
72 MSG WT NO ANS: Message Waiting calls to RING-NO-ANSWER extensions
Number of calls Message Waiting placed to RING-NO-ANSWER
extensions.
73 MSG WT ANSWER: Message Waiting calls ANSWERED
Number of calls Message Waiting placed that were ANSWERED.
74 NAME RECORD:
NAME messages recorded
Number of NAME messages recorded.
75 EXTND FAILED: SEND failed to EXTENDED MAILBOX — mailbox full/set to not
accept message
Number of times a message WAS NOT SENT to an Extended Mailbox
because the mailbox was full or set not to accept messages.
76 OFFSITE SETUP: SET UP Offsite Message Waiting
Number of times Offsite Message Waiting digit string was SET UP.
77 MW GOT CX PORT:
Message Waiting called CX/MX port
Number of times an extension was called and answered by a VP 300
CX/MX PORT.
78 NET SND ATTMPT:
NETWORK message send ATTEMPT
The number of Protocol 1 or 3 network message send attempts. This
peg is incremented each time the local system attempts to transmit a
voice message.