Toshiba VP 300, Installation Instructions Manual

Page: 172 / 614

Number Description
28 Broadcast message to collocated cabinet
29 Standard fax message
30 Message left after forward from busy extension
31 Message left after forward from No Answer
32 Message left after all forward
33 Fax recorded for an application processor
34 Fax voice annotation
■
Network Mailbox Status
The list network mailbox command displays information contained in the network mailbox about a
specific location, including the message numbers of all the messages in the network mailbox waiting
to be sent to that location. It also shows the current delay (in minutes), the error retry count, and the
retry limit.
L NET x
where x is the location of the system to which the messages will be sent. The command can also be
abbreviated as L N.
The following example shows the information displayed.
DELAY Displays the amount of time in minutes left before a network message to
the specified network mailbox is re-tried. Its value is set by System
Parameter 69 — NET: REMOTE DELAY BEFORE RETRY (MIN).
ERRORS
Displays the number of times a network call or message attempt has failed.
LIMIT
Displays the number of times a network message is tried if a message
attempt fails. Its value is set by System Parameter 68 — NET: REMOTE
DELIVERY ATTEMPT LIMIT.
MESSAGE # Hexadecimal message headers for pending messages to network mailbox
locations. Refer to the Message Status section in this chapter.
■
Port Configuration Status
The LIST PORT command lists the current configuration status for a port. At the @ prompt, enter:
L PO x
where x represents the port number.
Enter
Enter
Toshiba VP Systems Release 7.1 July, 1994
5-14 Installation and Maintenance Manual
@L NET 640
LOCATION FRAME NUMBER: 0005
DELAY: 00000 MIN.
ERRORS: 00000
LIMIT: 00010
MESSAGE #
000E
0010
0012