Toshiba VP 300, Installation Instructions Manual

Page: 574 / 614

NO
➧
Determine the cause and correct the problem before continuing.
D. From the Superset 4, dial the Message Waiting – Deactivate feature access code
followed by the extension number of phone B. Does the PBX return dial tone within
three seconds?
NO
➧
Determine the cause and correct the problem before continuing.
E. Is the phone B message waiting indicator OFF?
NO
➧
Determine the cause and correct the problem before continuing.
F. Hang up to Superset 4.
NO
➧
Determine the cause and correct the problem before continuing.
7.
DISPLAY TEST FOR DIRECT CALLS
This test verifies that the MIC ports receive the proper display information from the
PBX for direct internal and direct external calls.
A. Using phone A, call out of the PBX and back in on the trunk that terminates at the
Superset 4.
B. Look at the Superset 4 display. The display should contain this information:
If the display does not contain this information, determine the cause and correct the
problem before continuing.
C. Hang up phone A.
D. Using phone A again, dial the extension number of the Superset 4.
E. Look at the Superset 4 display. The display should contain this information:
XXX is the extension of phone A.
If the display does not contain this information, determine the cause and correct the
problem before continuing.
F. Hang up phone A.
8. DISPLAY TEST FOR FORWARDED CALLS ON RING-NO-ANSWER
This test verifies that the MIC ports receive the proper display information from the
PBX for calls forwarded from an unanswered extension.
Internal Call Forwarded on Ring-No-Answer
A. Make sure phone B is on-hook.
XXX CALLING
T999 TEST
Toshiba VP Systems Release 6.1 February, 1993
10.3-32 Installation and Maintenance Manual