Toshiba VP 300, Installation Instructions Manual

Page: 232 / 614

Toshiba VP Systems Release 7.1 July, 1994
5-74 Installation and Maintenance Manual
Table 5-3 Hardware Error Types and Remedies (continued)
Error Type:Name Source Remedy Priority
46: Received DTMF
other than D
(AMIS)
While trying to establish
a connection with a
Protocol 4 (AMIS)
location, received non
D DTMF tone,
suggesting that a person’s
telephone number may
have been dialed. Check the route. Check that the PNN or
TNN is correct. Contact the system
administrator of the remote network. 1
DATA-1 =
DATA-2 =
ERROR CODE:
01 =
ERROR CODE:
02 =
WHILE TRYING TO ESTABLISH A CONNECTION WITH A LOCN,
WE GOT BACK DTMF WE WERE NOT EXPECTING, SUGGESTING
WE MAY HAVE, SOMEHOW, DIALED A PERSON’S TELEPHONE
NUMBER.
FOR PROTOCOL 1, 2 AND 3 WE COULD’VE GOT DTMF 0-9, * OR #
FOR PROTOCOL 4 WE COULD’VE GOT ANY DTMF OTHER THAN D
DATA-2 and DATA-3 = ARE THE INDEX INTO THE NETRLT TABLE
THAT LEADS US TO THE PROBLEMATIC LOCATION
REMEDY:
ATTEMPTING TO NETWORK WITH AN OEM MODEL THAT HAS
NETWORKING INCOMPATIBILITY
DATA-2 and DATA-3 = ARE THE INDEX INTO THE NETRLT TABLE
THAT LEADS US TO THE PROBLEMATIC LOCATION
REMEDY:
61: VCU: Insufficient
Control RAM
The VCU does not have
enough control RAM
for model specified
by CPU. Contact Toshiba Technical Support. 3
Check the route, PNN and TNN. Contact the system
administrator at the remote end.
Contact your Toshiba Technical Support center.
DATA-1 =
DATA-2 = MEGABYTES OF RAM ACTUALLY HAVE
MAX PORTS GIVEN BY CPU REQUEST
62: VCU: Insufficient
Voice RAM
The VCU does not have
enough voice RAM
for model specified
by CPU. Contact Toshiba Technical Support. 3
DATA-1 =
DATA-2 = MEGABYTES OF RAM ACTUALLY HAVE
MAX PORTS GIVEN BY CPU REQUEST