Toshiba VP 300, Installation Instructions Manual

Page: 160 / 614

COMMAND SUMMARY
The overall command structure for VP 300 maintenance commands is different from the verb-noun
protocol used in the UPDATE program. The following tables illustrate the format for each command with
BOLD letters in the left column indicating the minimum input. In some instances, a modifier and
extension may be required to complete the command string.
The system indicates it is ready to receive information by displaying the @ prompt. Complete examples of
the commands are provided in the Configuration manual, and in this chapter.
All command strings must be followed by before the system executes the command.
■
Listing Tables
Tables are listed from the @ prompt by entering LIST followed by the table name. To abbreviate,
enter:
L (table name)
For example, to list the Hardware Error Table, at the @ prompt enter L H. A space is always required
between the L (for LIST) and the following letter.
Command Basic Definition
L F LIST FEATURES
Prints the optional packages the VP 300 has installed. Gives the maximum
number of ports, drives SCHEDULE Table entries, and mailboxes.
L H LIST HARDWARE
Lists the Hardware Error Table.
L HE x LIST HEADER (x = MESSAGE NUMBER)
Lists the status of a message.
L INT n m LIST INTEGRATION STATUS
Lists the current state of the integration board, the diagnostic status, the status of
the links, and the pegs.
n = slot number
m = unit number
L M XXXX LIST MAILBOX (XXXX = MAILBOX NUMBER)
Lists the current configuration for the mailbox specified.
L M x M LIST MAILBOX M (x = MAILBOX NUMBER) (Release 6.1 or later)
Lists information about messages for a specific mailbox.
L NET XXXX LIST NETWORK MAILBOX (XXXX = NETWORK LOCATION CODE)
Lists messages in the network mailbox waiting to be sent to the specified
network location.
Toshiba VP Systems Release 7.1 July, 1994
5-2 Installation and Maintenance Manual
5.2
Enter
Enter