Toshiba VP 300, Installation Instructions Manual

Page: 154 / 614

Quick Reference Guide
Maintenance
Section Subject Command Information
Diagnostics
LIC TE L 4 x Test to see whether loop current is present on
(continued)
a specific port. x = port number.
LIC TE L 5 x Tone reflection test on one port.
x = port number.
Network Routes TE NET x y Tests network routes to a network location.
x = network location code (optional);
y = non-zero show digits dialed.
System Status TE S Checks voltages and temperatures.
Fax Application TE X x y z Fax loopback test. Tests that the fax modems on
Processor the Fax Application Processor can send and
receive fax data and that the TDM bus connection
is correct. (Release 7.1 or later)
x = slot number
y and z = fax channels
Hardware Data Fields BITTST x Converts hardware error data fields into bit sets.
Errors
x = hexadecimal number.
List Hardware L H Lists the Hardware Error Table
Error
Clear Hardware C H Clears the Hardware Error Table
Error Table
Toshiba VP Systems Release 7.1 July, 1994